Pocket pH meter
Would you like help with your purchase? Don't know how to choose a product? Email us at: info@ekokoza.com.
If you are interested in B2B cooperation contact us at email: b2b@ekokoza.com.
Characteristics
Pocket pH meter for measuring the acidity of water in pools, aquariums, laboratories, etc.
Practical small meter with one-point calibration.
The pH meter contains calibration powder.
Technical parameters
- Measurement range 0 - 14 pH, deviation 0.01 pH
- Resolution: 0.1 pH
- Measurement accuracy: ± 0.1 pH (at 20°C), ± 0.2 pH
- Calibration: manual single point pH7
- Working conditions: 0 - 50 °C, RH <95%
- Power supply: 3x1.5V button battery (included)
Instructions for Use
- Turn on the meter by pressing the ON/OFF button.
- Before measuring, rinse the probe with clean or distilled water and gently dry it with a soft cloth or tissue.
- Immerse the probe into the water or mixture you want to test (for example, cream, curd or solution). Make sure only the lower part with the probe is submerged – not the entire device.
- Wait a few seconds until the numbers on the display stabilize, then read the pH value.
- After measuring, rinse and dry the probe again so it stays clean and ready for next use.
After use, keep the meter dry, at room temperature, and away from direct sunlight.
From time to time (for example every few weeks), calibrate it using the included pH7 calibration powder.
This will keep your pH meter accurate and reliable for a long time.
| Length (mm) | 152 |
| Unit weight (g) | 50 |
| Width (mm) | 30 |
| Package size | 1 |
| Height (mm) | 21 |
Ekokoza likes cookies! Cookies help us offer the right products, nice discounts and other great services. Just give us your consent to use them.