Decalact deo deodorant
Would you like help with your purchase? Don't know how to choose a product? Email us at: info@ekokoza.com.
If you are interested in B2B cooperation contact us at email: b2b@ekokoza.com.
It is an active deodorant substance with an antibacterial effect. It works as an ingredient that limits the growth of bacteria responsible for body odor. It is used in a low percentage as a functional ingredient. Its main task is to disrupt the metabolism of bacteria that break down sweat and cause unpleasant odor. Sweat itself does not smell, the odor is created by the activity of microorganisms.
It is suitable for natural aluminum-free deodorants, where it plays a major functional role. It is also suitable for products for sensitive skin, as it does not block sweat glands, but acts specifically against bacteria.
If you've ever made deodorant with just baking soda and coconut oil and the result wasn't effective enough or irritated your skin, this ingredient can significantly improve the quality of your product.
- Deodorant active ingredient is a natural active ingredient for deodorants. It is a lipophilic transparent liquid.
- You can
mix it in the oil phase or in the water phase (for O/W emulsions,
it could be heated in the water phase, for water-based products without a lipophilic
phase, such as water-based sprays or roll-ons, it should
mix). - It is an active blend with antimicrobial properties.
It is liquid and easy to handle. The synergistic composition is highly
effective against microorganisms that cause body odor. - In vivo study results demonstrate 24 h deodorizing activity comparable to or better than comparator products.
- The active substance is soluble in the water phase (up to 40 ° C) and also in the fat phase (up to 60 ° C).
- Raw material for cosmetic production.
It is excellent at
- Prevention of sweat formation, prevention of odor formation, odor masking
Dosage: 0.3 - 1.0%
Tag
- Sodium caproyl/lauroyllactate, triethyl citrate, Salvia Officinalis (sage) oil
Roll-on deodorant gel (water-based)
Water gel (roll-on) with preservation, suitable for everyday use.Ingredients
| Phase | Ingredient name | % | Conversion to grams |
|---|---|---|---|
| A | Distilled water | 86.3 | 43.15g (for 50g) |
| A | Glycerin (palm free) | 5.0 | 2.50 g |
| A | Xanthan gum | 0.5 | 0.25 g |
| C | Decalact Deo | 0.8 | 0.40g |
| C | Sodium Citrate | 0.3 | 0.15 g |
| C | Cosgard | 0.6 | 0.30g |
| Total | 100 | 50.00 g |
Procedure
- Disinfect the tools and packaging. Weigh out the water and glycerin (phase A).
- While stirring vigorously, stir in the xanthan gum and let it hydrate for 10 minutes. Mix until smooth.
- At a temperature of up to 40 °C, add Sodium Citrate, mix.
- Add Decalact Deo and finally Cosgard preservative. Mix thoroughly.
- Check the pH (the recommended target for water-based roll-on is usually around 5–5.5) and adjust as needed with a suitable regulator.
- Fill into roll-on packaging.
Packaging and use
- Ideally a roll-on bottle. Let stand for 24 hours to adjust viscosity.
- Apply to clean and dry underarm skin.
- Aquatic product requires preservation and hygienic production.
Solid deodorant stick (waterless)
Balm stick. With proper hygiene, it is not normally preserved.
Ingredients
| Phase | Ingredient name | % | Conversion to grams |
|---|---|---|---|
| A | Coconut oil | 35.0 | 35.00 g (for 100 g) |
| A | Shea butter (ORGANIC deodorized) | 20.0 | 20.00 g |
| A | Candelilla wax | 10.0 | 10.00 g |
| B | Cornstarch | 26.2 | 26.20g |
| B | Zinc Ricinoleate | 8.0 | 8.00 g |
| C | Decalact Deo | 0.8 | 0.80g |
| Total | 100 | 100.00 g |
Procedure
- Heat phase A in a water bath to approximately 75–85 °C to fully dissolve the wax.
- Add Zinc Ricinoleat to the hot oil phase and stir until completely dissolved (do not rush - this will affect the smoothness of the bar).
- Remove from heat and add cornstarch while stirring.
- Let cool below 60°C and add Decalact Deo. Mix thoroughly.
- Fill into a stick container and let harden.
Packaging and use
- A deodorant tube (e.g. paper) or a classic stick packaging is suitable.
- Apply a thin layer to clean, dry skin.
- The anhydrous product is not normally preserved, please ensure cleanliness during production and use.
Cream deodorant (O/W emulsion)
Light cream deodorant - oil-in-water emulsion, with preservation.Raw materials
| Phase | Ingredient name | % | Conversion to grams |
|---|---|---|---|
| A | Distilled water | 72.2 | 72.20 g (for 100 g) |
| A | Glycerin (palm free) | 3.0 | 3.00 g |
| B | Emulsifier Olivem 1000 | 6.0 | 6.00g |
| B | Coconut oil | 10.0 | 10.00 g |
| B | Shea butter (ORGANIC deodorized) | 5.0 | 5.00 g |
| C | Cornstarch | 2.0 | 2.00 g |
| C | Decalact Deo | 0.8 | 0.80g |
| C | Panthenol (provitamin B5) 75% | 1.0 | 1.00 g |
| C | Cosgard | 0.6 | 0.60g |
| Total | 100 | 100.00 g |
Procedure
- Heat phase A to 70–75 °C.
- Heat Phase B separately to 70–75 °C to fully dissolve Olivem 1000.
- While stirring constantly, pour phase B into phase A and homogenize. Stir while cooling.
- At approx. 45–40 °C, add cornstarch (mix in a small portion of the emulsion beforehand for easier incorporation).
- Below 40 °C add Decalact Deo, panthenol and preservative.
- Check pH (typically aim for around 5–5.5 depending on the preservation system) and adjust if necessary.
- Fill into a sanitized can or airless.
Packaging and use
- Can or airless is suitable. Let the consistency stabilize for 24 hours.
- Apply a small amount to the underarms and allow to absorb.
- Aquatic product requires preservation and hygienic production.
| Most common use | Deodorants |
| Unit volume (ml) | 50 |
| Solubility | Into the water phase |
| Effect | Clear skin and freshness (acne, pores, exfoliation, deodorant), Soothing and regeneration |
| Package size | 1 |
| Manufacturer | Ekokoza |
Ekokoza likes cookies! Cookies help us offer the right products, nice discounts and other great services. Just give us your consent to use them.