Airless white plastic bottle, 15 ml

• It is not suitable for a filling that contains wax or that reacts by softening to a change in temperature.
• The packaging can be used repeatedly.
• Packaging suitable for lotions, creams, gels.
• Airless technology means that your products are applied cleanly and hygienically.
• The packaging is suitable for products sensitive to contact with air.
• Plastic type: PP

This airless dispenser comes in two parts. Container with integrated piston and valve head with lid already installed. This airless dispensing system is a top fill system. This means that the piston is already inside the container and will be filled from the top. After filling, the valve head with the cap is pressed onto the container.

Airless dispensers should be filled more than the nominal volume. You should be oriented close to the maximum fill volume. If the dispenser is filled to nominal volume, creating a small air gap between the filling material and the bottom of the dispenser head, additional pump strokes would be required to bring the airless dispensing system into service.

Please note that airless dispensers are only intended for products with viscosities from approximately 1,000 to 70,000 mPas. It is therefore advisable to check the correct viscosity before bottling!

In airless systems, the product is isolated from air. This is why airless dispensing systems allow manufacturers to eliminate the use of preservatives. Therefore, airless dispensers are the right packaging system for organic cosmetics.